|
  The
600 Series filter bag/strainer vessels are designed with a recessed
basket and a volume displacer permanently welded to the top cover.
These vessels are available in three different sizes and a variety
of pressure ratings with 150 psi being standard. Standard swing
bolt closure on all three designs allows for quick accessibility
when a filter bag or strainer needs to be replaced. No special tools
are required to release the cover seal.
Standard Features
· Available in Carbon Steel, 304 and 316 Stainless Steel
· Adjustable height tri-pod stand
· Built-in volume displacer in cover
· Inlet/outlet orientation: Side-in Bottom-out (standard)
or Side-in Side-out (optional)
· Low pressure drop
· Positive cover seal
· Available O-ring materials: Buna N, EPR, Viton® A,
Teflon®, & Teflon® Encapsulated
· Easy cleanability
· Heavy duty perforated basket
· ASME code stamp available on all three designs
· Swing bolt closures
· .25lg NPT differential pressure gauge/vent tap
· Pipe sizes from .75ls to 3l5 NPT, RFF or Quick Disconnect
connections
Optional Features
· Epoxy coating, electro-polish and fuse coating
· Higher pressure ratings available up to 3,000 psi
· Steam jacketed
· Bag hold down devices
· Custom designs
· Sanitary constructions
· Mesh-lined basket for straining applications - 50 micron
and higher
Available
· Inline
low flow filter UF1-30 and IF1-65
· UF
& CQX (90’s & 180’s) filter bag vessel
· Multi-bag
filter bag vessels
· 600
Series filter bag vessels
Click Here
for Bag Filter
|
